Advanced Hot Pressing Equipment - Vulcanizer
The vulcanizer is suitable for the vulcanization of various rubber products and is advanced hot pressing equipment for pressing and forming various thermosetting plastics. It is suitable for the vulcanization of various rubber products.
Rubber Vulcanization Processing:
The functions of pre-heating required for the rubber vulcanization process, automatic exhaust after feeding, pressure-holding vulcanization, timing alarm, automatic mold opening, and product mold release are integrated into one. Adopt PLC programmable controller or manual operation to record the required technological process and facilitate operation and management. The vulcanizer is divided into three forms: electric heating, steam heating, and heat transfer oil heating.
The rubber vulcanizer has perfect functions and a compact structure. It has functions such as timed clamping, automatic pressure compensation, automatic temperature control, automatic timing, and an alarm when it arrives. The surface temperature of the hot plate is uniform, and the temperature control is accurate. The temperature controller can accurately record temperature data. Stable and reliable pressure holding, safe and convenient operation.
When Maintaining the Vulcanizer, You Should Pay Attention to:
Rubber Vulcanization Processing:
The functions of pre-heating required for the rubber vulcanization process, automatic exhaust after feeding, pressure-holding vulcanization, timing alarm, automatic mold opening, and product mold release are integrated into one. Adopt PLC programmable controller or manual operation to record the required technological process and facilitate operation and management. The vulcanizer is divided into three forms: electric heating, steam heating, and heat transfer oil heating.
The rubber vulcanizer has perfect functions and a compact structure. It has functions such as timed clamping, automatic pressure compensation, automatic temperature control, automatic timing, and an alarm when it arrives. The surface temperature of the hot plate is uniform, and the temperature control is accurate. The temperature controller can accurately record temperature data. Stable and reliable pressure holding, safe and convenient operation.
When Maintaining the Vulcanizer, You Should Pay Attention to:
- The storage environment of the vulcanizer should be kept dry and well-ventilated to avoid the dampness of electrical circuits due to humidity.
- Do not use the vulcanizer outdoors on rainy days to prevent water from entering the electric control box and heating plate.
- If the working environment is humid and watery when dismantling and transporting the vulcanizing machine, the items should be raised on the ground, and the vulcanizing machine should not be in direct contact with water.
- If water enters the heating plate due to improper operation during use, you should first contact the manufacturer for maintenance. If emergency repairs are needed, open the cover on the heating plate, pour out the water first, then set the electric control box to manual operation, heat it to 100°C, keep it at a constant temperature for half an hour, dry the circuit, and put it in the Belt gluing is performed manually. At the same time, the manufacturer should be contacted in time for the overall replacement of the line.
- When the vulcanizer does not need to be used for a long time, the heating plate should be heated every half a month (the temperature is set at 100 °C), and the temperature should be maintained for about half an hour.
- After each use, the water in the hydraulic plate should be cleaned, especially in winter, if the water cannot be cleaned, it will often lead to premature aging of the rubber of the hydraulic plate and reduce the service life of the hydraulic plate. The correct way to release the water is to carry out the vulcanization machine after the vulcanization and heat preservation are completed and before the vulcanizer is disassembled. If the water is discharged after the machine is disassembled, the water in the water pressure plate may not be completely drained.
Reference: baike
COPYRIGHT© PMM